How To Use Set Relocation Feature On Your NEC Phone System
8 min read
Step by Step Guide
How to use the set relocation feature on either your NEC SL1100 or SV9100 telephone system:
- First, you’ll go to one of the extensions, press the ‘Speaker’ key and enter 7-8-9. It’s going to ask you for a password. The default password is four zeros.
- Next, the system will ask you for the extension number of the phone that you want to swap.
In this example, I’m going to enter 2-2-2. You’re going to notice on the screen it says ‘Completed’.
- Now press ‘Speaker’ to exit, which will now have 2-2-2 in the place of where 2-2-1 was.
Fill out the form below and one of our specialists will get back to you as soon as possible.